Awind WP-820 User's Manual Bedienungsanleitung PDF herunterladen (Seite 26)

takes an IP address assigned to it by the server. When the wePresent box is

connected to a LAN that does not have a DHCP server, the wePresent box becomes

the DHCP server in the network.

< IP Setup>

♦ You can select “obtain IP address automatically” or “Use the following IP

address”

♦ IP Address: The default value is 192.168.100.10.

♦ Subnet Mask: The default value is 255.255.255.0

♦ Default Gateway: The default value is 192.168.100.10

♦ You can select “auto(Enable/Disable DHCP Server” or “Disable”)

♦ Start IP: The start IP address of DHCP Server.

♦ End IP: The end IP address of DHCP Server.

< Wireless Setup>

♦ Region: default value is “Worldwide”.

♦ SSID: SSID string, max. Length is 32 bytes.

♦ Channel: to set fixed channel or Auto. The “Auto” means after power

wePresent, it will scan all of wireless channel and select clear one

channel automatically.

♦ WEP: you can Disable WEP key or select one of 64bit or 128bit in ASCII

or HEX string.

♦ Key: If WEP is enabled, you have to set key value according to WEP

mode you selected.

< Gatekeeper>

Gatekeeper is designed for ensuring the enterprise network security within

wePresent box

♦ All Block can block Guest Users(through wireless) to access all office

network(LAN),

♦ All Allow can pass Guest Users(through wireless) to access all office

network

♦ Internet Only can block Guest Users (through wireless) from office

network (LAN) but still reserve internet connection capability.

<Apply >: press button to select this mode

<Cancel>: press button to abort action.

<Back>: Back to Operating mode main menu

1 2 ... 21 22 23 24 25 26 27 28 29 30 31

Keine Kommentare

Awind WP-820 User's Manual Bedienungsanleitung Seite 26