Awind WP-920 Bedienungsanleitung PDF herunterladen (Seite 38)

< Auto-Configuration Network Setup>

The default setting of the wePresent box is DHCP client. When the wePresent box

is connected to a LAN that already has a DHCP server present, the wePresent box

takes an IP address assigned to it by the server. When the wePresent box is

connected to a LAN that does not have a DHCP server, the wePresent box becomes

the DHCP server in the network.

< IP Setup>

♦ You can select “obtain IP address automatically” or “Use the following IP

address”

♦ IP Address: The default value is 192.168.100.10.

♦ Subnet Mask: The default value is 255.255.255.0

♦ Default Gateway: The default value is 192.168.100.10

♦ DNS Server: The default value is 192.168.100.10

♦ You can select “auto(Enable/Disable DHCP Server” or “Disable”)

♦ Start IP: The start IP address of DHCP Server.

♦ End IP: The end IP address of DHCP Server

♦ Subnet Mask: The default value is 255.255.255.0

♦ Default Gateway: The default value is 192.168.100.10

♦ DNS Server: The default value is 192.168.100.10

< Wireless Setup>

♦ Wireless LAN: The default value is “Enable”

♦ Region: default value is “Worldwide”.

♦ SSID: SSID string, max. Length is 32 bytes.

♦ SSID Broadcast: The default value is “Enable”

♦ Channel: to set fixed channel or Auto. The “Auto” means after power

on wePresent, it will scan all of wireless channel and select clear one

channel automatically.

♦ Encryption: you can select “Disable” or one of WEP/WPA/WPA2 64bit

or 128bit in ASCII or HEX string.

♦ Key: If Encryption is enabled, you have to set key value according to

the encryption mode you selected.

< AP Client>

♦ Connect to Existing AP: Input the SSID of Home WiFi AP you want to

connect.

♦ Encryption: you can select “Disable” or one of WEP/WPA/WPA2 64bit

or 128bit in ASCII or HEX string.

♦ Key: If Encryption is enabled, you have to set key value according to

the encryption mode you selected.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 50 51

Keine Kommentare

Awind WP-920 Bedienungsanleitung Seite 38